Free Beret Sewing Pattern: Easy Tutorial in 7 Sizes

User avatar placeholder

20 November 2026

A soft beret is one of those little accessories that can change a whole outfit. Wear it with a wool coat, pull it on with a cardigan, or tilt it slightly to one side with a simple sweater. I wanted mine to feel comfortable and relaxed, with enough depth to sit a little lower on my head.

This free beret sewing pattern comes in seven sizes for a head circumference of 55–61 cm. In this tutorial, I’ll show you how to sew it with lining or without lining, using the same main pattern pieces. The shaped side band gives the beret a softly rounded silhouette, while the folded headband finishes the opening.

You’ll find the size chart and free PDF pattern near the bottom of this post. First, watch the video below, then choose your fabric and follow the steps for your preferred version.

Watch the Beret Sewing Video Tutorial

Follow along with the video as you cut your fabric, join the curved pieces, and finish your beret. Keep the written instructions below nearby, especially when attaching the headband and lining.

If you enjoy sewing hats, you can also watch my earlier beret tutorial. For this seven-size version, use the pattern and sewing instructions in this post.

About This Beret Pattern



This is a manageable project if you have basic sewing skills and feel comfortable sewing gentle curves. There are no zippers or buttonholes, and you can sew both versions on a regular sewing machine.

DetailWhat to know
SizesSeven sizes: 55–61 cm head circumference
ShapeSoft crown, shaped side band, and folded headband
OptionsLined or unlined
Pattern piecesCrown, side band, and headband/facing
Seam allowance1 cm, approximately 3/8 inch, included along sewing edges
EquipmentRegular sewing machine; serger optional
Free downloadNear the bottom of this post, below the size chart

Some DIY beret patterns start with a large circle and a second circle with an inner circle removed. This design uses a separate shaped side band instead. It forms the underside of the beret and adds depth beneath the crown.

The side band and headband are different pieces: the side band shapes the main body, while the headband sits around your head. Keeping those names in mind makes the instructions much easier to follow.

Should You Add Lining?

Choose the unlined beret for fewer construction steps and a lighter finish. You’ll tidy the exposed raw edges inside with a zigzag stitch or serger.

Choose the lined beret if you want the inside seams enclosed or prefer a smooth fabric between your head and the main fabric. Lining can make wool more comfortable against the skin, although warmth depends on the fabrics you choose.

If you would prefer a close-fitting stretch hat, try my original beanie sewing tutorial with a free pattern. It has a different shape and construction from this beret.

Fabric and Supplies

The fabric does a lot of the work here. A supple fabric lets the crown fall gently to one side; a stiff fabric makes it stand farther away from the head.

Choosing the Main Fabric

For a soft winter beret, look for a wool blend or lightweight coating that bends easily in your hand. Avoid choosing by fiber name alone: two wool fabrics can have completely different weights and drape.

FabricWhat to expect
Soft wool or wool blendA warm, softly rounded beret; check thickness at the folded band
Lightweight melton woolA more defined shape; avoid very heavy coat-weight fabric
Soft corduroyTexture and a casual finish; cut all pieces with the nap running consistently
Supple cotton twillA lighter everyday option with a little structure
Stable, low-stretch fleeceA soft finish; test the fit and use a stitch that accommodates any stretch

Jumbo corduroy can become bulky where the headband and body meet. If you want that texture, test several folded layers under your presser foot before cutting the whole hat.

Very thin, soft fabric may collapse more than you expect. For your first version, choose something with enough body to hold a gentle curve without feeling rigid.

Choosing the Lining Fabric

Use a lightweight lining fabric that feels comfortable against your skin. Cotton lawn, lightweight cotton poplin, or a smooth rayon lining are options. Choose a thin lining rather than adding another thick layer inside the hat.

Try the outer fabric and lining together in your hand. They should bend comfortably without forming a stiff, padded edge.

What You’ll Need

  • Main fabric: approximately 50 cm / 20 inches of fabric 140 cm / 55 inches wide as a starting estimate.
  • Lining fabric, if making the lined version: approximately the same amount.
  • Matching thread and a suitable sewing machine needle.
  • Fabric scissors, pins or clips, and a tape measure.
  • Fabric chalk or a removable marking pencil.
  • Iron and pressing cloth.
  • The PDF pattern in your chosen size.

Check the cutting layout before buying fabric. Your size, fabric width, print direction, and nap can change the amount needed.

This project uses a small amount of fabric, so it is worth checking what remains from a previous project. You still need a piece large enough for the crown; tiny scraps alone will not fit the original layout. For smaller leftovers, browse my fabric scrap sewing projects.

Before You Cut: Size, Printing, and Pattern Pieces

Measure around your head where you want the headband to sit, usually just above your eyebrows and ears. Keep the tape measure level and comfortably snug, without pulling it tight. Use that measurement with the size chart near the download.

If you are between sizes, the larger size is a reasonable starting point, but baste and check the fit before finishing. Fabric thickness and lining can make the inside feel smaller. A quick test in fabric of similar weight is especially useful if you are using an unfamiliar material.

Print the PDF at 100% or Actual Size, with “Fit to Page” turned off. Measure the printed test squares before cutting. Use the paper format stated on the download; an A0 file needs a full-size copy-shop print unless a separate tiled version is supplied.

Prepare your fabric according to its care requirements before cutting. For washable fabrics, prewash as you intend to wash the finished beret. Treat wool according to the fabric supplier’s instructions.

Cutting Guide

Pattern pieceMain fabricLining fabric, if used
Crown / topCut 1 on the foldCut 1 on the fold
Shaped side bandCut 2 mirroredCut 2 mirrored
Headband / facingCut 1 on the foldNone

Follow the fold lines, grainlines, and matching marks on the pattern. The straight fold edges sit against the fabric fold; do not cut along the fold.

The 1 cm seam allowance is already included along the sewing edges. Do not add it again. Use the same allowance throughout so the curved seams and opening keep their intended size.

How to Sew the Beret Without Lining

The unlined version is a useful place to start because you can see each seam as the hat takes shape.

1. Join the Side Band Pieces

Place the two side band pieces right sides together. Match and sew both pairs of short edges with a 1 cm seam allowance to make a ring.

Finish these seam allowances with a zigzag stitch or serger, then press as appropriate for your fabric. If you want to press them open, finish the edges separately.

2. Attach the Crown

Unfold the crown so you have the full top piece. Mark four equally spaced points around its outer edge and around the upper edge of the side band. Keep any original pattern notches as your main matching guides.

With right sides together, pin the crown to the upper curved edge of the side band. Match the marks first, then add pins between them. Check that you are using the correct edge of the side band before sewing.

Sew around the curve with a 1 cm seam allowance. A straight stitch suits stable woven fabric; use an appropriate stretch stitch for fabric that needs to stretch at the seam.

Keep the fabric supported and guide it gently. Do not pull one layer to force the cut edges to match. If they seem very different in length, stop and check your size, printing scale, and seam-line matching.

Check for caught folds, then finish the raw edges. Carefully grade bulky allowances where needed without cutting close to the stitching.

3. Make the Headband

Unfold the headband piece. Bring its short edges together, right sides facing, and sew them to form a ring. Press the seam open where possible.

Fold the ring lengthwise with wrong sides together, so its two long raw edges meet. Press gently. You now have a double-layer band with a folded edge on one side and raw edges on the other.

4. Attach the Headband and Check the Fit

Mark the band and lower beret opening into quarters. Place the folded band against the right side of the beret, matching the raw edges and quarter marks. Its folded edge points toward the crown while you sew.

Baste around the opening at the 1 cm seam line, then turn the band down and try on the hat. It should feel secure without squeezing.

Once you are happy with the fit, sew the final seam, remove the basting, and finish the exposed allowances. Press the seam allowances toward the body if your fabric allows.

Turn the beret right side out and arrange the crown with your hands. Give it a gentle press where needed, without flattening its rounded shape.

How to Sew the Beret with Lining

A Little Tip for Your Hair: If you’re making a lined beret, consider using silk or silk satin for the lining. Their smooth surfaces may help reduce friction against your hair, potentially minimizing tangles and frizz. For a more affordable and easy-to-find alternative, try a lightweight, smooth cotton lawn or cotton voile. These breathable fabrics are comfortable to wear, although they won’t have quite the same silky feel. It’s a small detail that can make your handmade beret even nicer to wear!

For the lined version, you’ll make the outer hat and lining separately. The folded headband sits between them at the lower opening, enclosing that seam inside the finished hat.

Leave a turning opening in the lining where its crown joins the side band. This gives you room to turn the hat without relying on the short side-band seams being long enough for a turning gap.

1. Sew the Outer Hat

Join the main fabric side bands and attach the crown as described above. Do not attach the headband yet.

Press the seams and reduce bulk where necessary. The lining will cover these allowances, so they do not need the same visible finish as the unlined version. If the fabric frays heavily, tidy the edges without trimming away your fitting allowance.

2. Sew the Lining, Leaving a Turning Gap

Place the two lining side band pieces right sides together and sew their short edges to form a ring, leaving a 4 cm (1½ inch) opening in one of the side seams.

Backstitch at both ends of the opening to secure the stitches. You’ll use this gap later to turn the beret right side out.press seams flat .

Next, pin the lining crown to the upper edge of the side band, right sides together.

Sew all the way around with a 1 cm seam allowance, keeping the opening in the side band seam untouched.

3. Prepare and Baste the Headband

Sew the main fabric headband into a ring and fold it lengthwise, wrong sides together, as for the unlined version.

Turn the outer hat right side out. Match the band’s raw edges to the outer hat’s lower opening, with its folded edge pointing toward the crown. Match the quarter marks and baste within the seam allowance to hold the band in place.

Check the fit before enclosing the seam, remembering that the lining will take up a little room inside.

4. Join the Outer Hat and Lining

Keep the outer hat right side out and the lining wrong side out. Put the outer hat inside the lining so their right sides face each other.

At the lower opening, the folded headband is now sandwiched between the outer hat and lining. Align all raw edges, matching the seams and quarter marks. Check that the band is not twisted.

Sew around the entire opening with a 1 cm seam allowance. This seam goes through the outer fabric, both layers of the folded band, and the lining.

Inspect the stitching before turning. All layers should be caught securely, with no accidental folds. Grade bulky allowances carefully if needed.

5. Turn the Beret Right Side Out

Reach through the opening in the lining and gently pull the hat through. Work a little fabric through at a time instead of tugging on the gap.

Push the lining into the outer hat and unfold the headband downward. Smooth everything with your fingers, then try on the beret while the lining opening is still accessible.

6. Close the Opening and Press

Fold the allowances at the turning gap inward along the original seam line. Close the gap by hand with a ladder stitch, or machine-stitch close to the folded edges if you prefer.

Press gently using heat settings suitable for both fabrics. Test on a fabric scrap first and use a pressing cloth for wool or fabrics that mark easily. Avoid flattening corduroy pile or applying excessive heat to synthetic fleece.

Your finished beret should have a smooth lining inside and an enclosed seam around the headband.

How to Decorate Your Beret

One of the fun things about making your own beret is adding little details that make it yours! You can keep it simple or dress it up depending on your mood.

Try adding a vintage brooch, cute hair pins, snap clips, decorative safety pins, enamel pins, or small embroidered patches. Even one little accessory can completely change the look of your beret.

I especially love removable decorations because you can switch them around to match different outfits.

Just be gentle with delicate fabrics, as pins can leave tiny holes.

Small Fixes That Make a Difference

The beret feels tight. Check the printed scale, your seam allowance, and the finished band before changing sizes. Thick fabric takes up space when folded, an effect often called turn of cloth. A heavier lining can also reduce the room inside.

The crown stands up too much. The fabric may be firmer than the look you want. Try arranging the crown to one side; for your next version, choose a more supple fabric rather than making the pattern smaller straight away.

The curved seam puckers. Check for caught folds, uneven feeding, or stretched edges. Unpick the affected section and pin it again, matching the seam lines. Test your stitch length and tension on offcuts first.

The lining bunches inside. Make sure it is fully pushed into the crown and that all matching points were aligned. Check for accidentally caught fabric before trimming anything.

The headband looks bulky. Grade the enclosed allowances and press the joining seams carefully. A thinner lining or lighter main fabric may give a cleaner finished look next time.

Questions About Sewing This Beret

Is this a good beginner sewing project?

Yes, if you can sew a consistent seam allowance and are ready to practice curves. Start with the unlined version and a stable fabric that does not slip around easily. Pinning the curved edge in small sections makes the sewing much easier to control.

Can I use rib-knit fabric for the headband?

A rib-knit band is a pattern adaptation, rather than a direct swap. Its length depends on stretch and recovery, so the original band measurement may not give the same fit. For your first beret, use the supplied band as intended and test the fit.

If you want a project designed around stretchy fabric, my unlined slouchy beanie pattern is another option.

Can I make a reversible beret?

The lined construction encloses the seams, so it can be a starting point for a reversible version. Choose two fabrics that look good on the outside, close the turning opening neatly, and check the appearance and fit on both sides. Very different fabric weights may make one side sit better than the other.

Do I need to draft my own beret pattern?

No. The supplied PDF includes the crown, shaped side band, and headband. You do not need to draw circles or calculate a new headband length. Choose your size from your head circumference and print at the correct scale.

Can I add a button on top?

Yes. A small fabric-covered button at the center of the crown can be a pretty finishing detail. Attach it securely to the outer fabric before assembling the lining so the stitches are hidden inside. Keep it light enough that it does not pull the crown downward.

More Hats to Sew Next

If you enjoyed making a lined hat, my beanie sewing tutorial gives you another way to practice joining an outer layer and lining. You can also follow the beanie video tutorial on YouTube.

For a lighter project with fewer pieces, try the seven-size slouchy beanie. It uses stretch fabric and has no lining, making it a different option for your handmade winter wardrobe.

You’ll find more sewing videos on my Sparrow Refashion YouTube channel.

Your Beret, Your Fabric Choice

A cream wool blend, chocolate corduroy, or a bright color can give the same pattern a completely different feel. Start with a fabric you enjoy wearing, take your time around the curves, and check the fit before closing everything up.

If you make your own beret, share it on social media and tag @sparrow_refashion. I’d love to see which fabric you choose.

Happy sewing!

Download the Free Beret Sewing Pattern

The free PDF pattern includes seven sizes for head circumferences from 55 to 61 cm. Choose by your measurement rather than the size you normally buy in ready-made hats.

Subscribe to continue reading

Subscribe to get access to the rest of this post and other subscriber-only content.

Image placeholder

I create sewing patterns, refashion projects, and practical tutorials designed to make sewing feel less intimidating and more creative. Most of what you see here starts with something I wanted to wear, remake, or figure out for myself, then I turn the process into a tutorial you can try too.