Free Women’s Hoodie Sewing Pattern: 8 Sizes + Tutorial

User avatar placeholder

16 November 2026

A soft hoodie is one of those things I always like having close by—something comfortable to pull on for a walk, a quiet morning, or an extra layer at home. Making your own means choosing the fabric, color, and little details that make it feel like you.

This project grew out of my free sweater sewing pattern. I kept the simple construction and added a hood and kangaroo pocket for a practical everyday version. Below, I’ll walk you through choosing your fabric, preparing the pattern, and sewing your hoodie step by step.

Prefer a boxier shape? My unisex hoodie sewing tutorial gives you another style to compare before choosing your project.

Watch the Sewing Tutorial

Use the video alongside the written steps if you would like a closer look at the construction.

You can find more of my sewing videos on Sparrow Refashion on YouTube.

Women’s Hoodie: Project at a Glance

DetailInformation
PatternFree women’s hoodie PDF for subscribers
Sizes8 sizes, XS–4XL
Skill levelConfident beginner
Sewing timeApproximately 3–5 hours, depending on experience
FeaturesHood, kangaroo pocket, ribbed cuffs, and hem band
FabricStretch knit suitable for the pattern; rib knit for bands
Seam allowance1 cm (3/8 in), included, unless otherwise marked
EquipmentRegular sewing machine or serger

Choose Your Hoodie Fabric

French terry is a lovely option for an everyday hoodie, while sweatshirt fleece adds warmth for colder days. Check the stretch before buying: fabrics with the same name can behave very differently.

The original sweater pattern uses fabric with 50–70% stretch. If you are using that same body pattern for this hoodie, keep that requirement unless your hoodie pattern instructions specify otherwise. A low-stretch sweatshirt fleece can make the same size feel much tighter.

To check, mark a 10 cm section across the fabric’s stretch direction, away from the raw edge. It should stretch comfortably to 15–17 cm for 50–70% stretch, without forcing it, and recover when released.

FabricWhat to look for
French terryA soft, medium-weight knit with the required stretch
Sweatshirt fleeceA warm knit with enough stretch; avoid stiff, low-stretch versions for an unchanged sweater base
Sweater knitA stable knit for a softer, more draped hoodie
Rib knitGood stretch and recovery for cuffs and the hem band

Prewash and dry the fabric as you plan to care for the finished hoodie. Let it relax flat before cutting.

If sewing knits is new to you, my beginner’s guide to sewing with stretch fabric explains the needles and stitches that make these projects easier.

How Much Fabric Do You Need?

The hood and pocket need extra fabric beyond the original sweater pieces. These are planning estimates for fabric approximately 150 cm (59–60 in) wide, with an unlined hood and kangaroo pocket.

SizeMain fabricApproximate yards, rounded up
XS–S2.0 m2¼ yd
M–L2.3 m2¾ yd
XL–2XL2.6 m3 yd
3XL–4XL3.0 m3½ yd

Allow approximately 0.4–0.6 m (½–¾ yd) of rib knit for the cuffs and hem band, depending on its width and your pattern layout.

These quantities are not a tested cutting layout. Arrange your chosen size’s full-size pieces at the actual fabric width before buying, and allow extra for shrinkage, directional prints, or matching patterns. A lined hood also needs additional fabric.

Choose Your Size and Print the Pattern

Measure around the fullest part of your bust and compare it with the size chart below. Check the waist and hip fit too, especially if the hem sits around your hips. Leave enough room for any layers you want to wear underneath.

Choose by measurements rather than your usual shop size. If you fall between sizes, consider the intended fit and fabric stretch before deciding.

Print at 100% or Actual Size, with “Fit to Page” turned off. Print and measure the test square first, then print the remaining pages and assemble them using the pattern’s page map.

For help with this part, follow my guide to printing and assembling PDF sewing patterns.

The free pattern download is at the bottom of this post, in the subscriber section. Subscribing is free too.

Supplies and Cutting List

You’ll need your main knit fabric, rib knit, matching polyester thread, a ballpoint or stretch needle suitable for the fabric, scissors or a rotary cutter, pins or clips, a measuring tape, and an iron.

A serger is optional. On a regular sewing machine, use a narrow zigzag or suitable stretch stitch for seams that need to stretch. Test the stitch on scraps first.

Pattern pieceCut quantity
Front1 on the fold
Back1 on the fold
Sleeves2 mirrored
Hood2 mirrored
Kangaroo pocket1 on the fold
Sleeve cuffs2 in rib knit
Hem bandAs marked on the pattern, in rib knit

For a lined hood, cut two additional mirrored hood pieces in a suitable lining knit.

Follow the grainlines and stretch arrows, and transfer the pocket placement marks and notches before removing the paper pieces. The hood replaces the sweater’s neckband, so you do not need to cut that band.

Use the hood designed to fit this neckline. A hood borrowed from another pattern may not match the neckline length or front overlap.

How to Sew the Hoodie

Use the included 1 cm (3/8 in) seam allowance, except where the pattern marks a different hem or finishing allowance. Press gently as you go without dragging the iron over the knit.

1. Prepare and Attach the Kangaroo Pocket

Work on the pocket while the front is still flat.

Turn the two hand-opening allowances to the wrong side. Press and topstitch them with a stitch that allows any necessary stretch.

Press the remaining attachment edges to the wrong side. Center the pocket on the front using the placement marks, checking that both sides sit evenly. Pin or baste it in place.

Topstitch the attachment edges, including the top edge, leaving both hand openings open. For a pocket designed to extend into the hem-band seam, leave its bottom edge raw and baste it to the front instead; the band will secure it later. Otherwise, turn under and topstitch the bottom edge too.

Reinforce the ends of the hand openings with a few extra stitches.

2. Sew the Shoulders

Place the front and back right sides together. Match and sew both shoulder seams, then press the allowances toward the back.

If your knit stretches out easily, add a suitable narrow stabilizer to the shoulder seams without pulling it tight. Test it on a scrap first so the seam stays comfortable.

3. Attach the Sleeves Flat

Open the body out with the right side facing up. Place a sleeve against its armhole, right sides together, matching the sleeve’s shoulder mark and front and back notches.

Pin along the curve and sew without stretching the armhole. Repeat with the second sleeve.

4. Sew the Sleeve and Side Seams

Fold the hoodie right sides together. Match the underarm seams, sleeve edges, and side edges.

Sew each side in one continuous seam from the sleeve opening, through the underarm, to the bottom of the body. Keep the layers aligned as you pass the underarm seam.

5. Sew the Hood

Place the two hood pieces right sides together and sew the curved seam from the crown down to the back neck. Press the seam gently.

For an unlined hood, turn the face-opening edge to the wrong side using the allowance marked on the pattern,

then press and stitch.

6. Attach the Hood to the Neckline

With right sides together, match the hood’s center-back seam to the center back of the body neckline. Match the remaining notches and position the front edges exactly as marked on the pattern, including any intended overlap.

Pin and sew around the neckline without pulling it out of shape. For a lined hood, sew through both hood layers and the body.

Press the seam allowance toward the body.

If you topstitch it down,

use a stitch that preserves the stretch needed to pull the hoodie over your head.

7. Add the Sleeve Cuffs

Join the short ends of each cuff right sides together to form a loop.

Fold the loop in half so the wrong sides are together and the raw edges meet.

Mark equal sections on the cuff and sleeve opening.

Place the cuff around the sleeve opening, right sides together, with all raw edges aligned. Match the markings and sew, stretching only the cuff as needed to fit the sleeve.

Repeat for the other cuff and press the seams toward the sleeves.

8. Attach the Hem Band

Join the band pieces as marked on the pattern to make a loop.

Fold it in half with wrong sides together and raw edges aligned.

Divide the band and hoodie hem into four equal sections. Match those points, pin right sides together,

and sew around the hem. Stretch the ribbing evenly between pins without stretching the hoodie body.

If your pocket’s bottom edge is designed to sit in this seam, check that it is caught neatly as you sew.

Press the seam allowance toward the body.

9. Finish and Try It On

Secure thread ends, check the pocket corners, and give the hoodie a gentle final press. Try it on and check that the hood, cuffs, and hem sit comfortably.

If you notice wavy seams or skipped stitches along the way, my guide to nine common knit-sewing mistakes can help you troubleshoot before continuing.

How to Style Your Handmade Hoodie

Once your hoodie is finished, it’s lovely to build an outfit around something you made yourself. Here are a few easy combinations using my other Sparrow Refashion projects.

Everyday Comfort with Straight-Leg Pants

Pair your hoodie with my straight-leg pants and sneakers for a comfortable everyday outfit. The straight silhouette balances the softer shape of the hoodie without making the whole outfit feel oversized. Try a cream hoodie with charcoal pants, or navy with a lighter neutral.

A Mini Skirt for a Different Mood

For a playful combination, wear your hoodie with my double-slit mini skirt. Add sneakers and crew socks on milder days, or opaque tights and ankle boots when it’s cooler. Let the hoodie sit naturally at the waist, with enough of the skirt showing below the hem.

Add a Handmade Shoulder Bag

My slouchy shoulder bag works beautifully with a relaxed hoodie outfit. Choose a plain fabric for a simple everyday look, or use a bandana print to add color to a neutral hoodie. The optional fabric ties are a sweet detail if you enjoy a softer finish.

Finish with a Cozy Beanie

For chilly walks, add a hat made with my free beanie sewing pattern. You can use leftover hoodie fabric if it meets the beanie’s stretch requirements, or choose a coordinating knit. A matching shade makes a lovely set, while burgundy, pink, or blue adds a little contrast.

You don’t need to sew a whole outfit at once. Start with your hoodie, pair it with pieces you already love, and add another handmade detail whenever you feel inspired.

A Cozy Finish and Your Next Small Project

I hope you enjoy making this hoodie and choosing the details that make it yours. A soft neutral, a cheerful color, or contrasting ribbing can give the same pattern a completely different feel.

If you have enough suitable stretchy fabric left, my free beanie sewing tutorial is a lovely next project. Check its fabric requirements first, then make a matching hat for colder days. For more cozy projects after that, browse my winter sewing patterns and ideas.

I’d love to see what you make. Tag me on Instagram @sparrow_refashion so I can see your fabric choices and finished hoodie.

Happy sewing, and enjoy your new handmade layer! ❤️

Download the Free Women’s Hoodie Sewing Pattern

The PDF pattern includes 8 sizes, XS–4XL, and is free for blog subscribers.

Subscribe below to access it. If you have just subscribed, return to this post and refresh the page; the download should appear in the subscriber section at the bottom. If prompted, use the “Already a subscriber?” option to sign in.

Subscribe to continue reading

Subscribe to get access to the rest of this post and other subscriber-only content.

Image placeholder

I create sewing patterns, refashion projects, and practical tutorials designed to make sewing feel less intimidating and more creative. Most of what you see here starts with something I wanted to wear, remake, or figure out for myself, then I turn the process into a tutorial you can try too.